Features
-
Equipped with shoot & recoil engine
By pulling the trigger, a weight of about 300g that simulates a bolt is activated at the same time as firing, and the intense recoil generated inside the main body is transmitted to the whole body. In addition, it is equipped with an auto stop system that stops firing when the magazine is empty and a bolt release mechanism that pulls the bolt handle to release the auto stop. It is a model that pursues the reality of operation and operability.
-
Reproduce 3 bursts
In addition to semi/full auto firing, 3 burst firing that fires 3 shots when the trigger is pulled is fully reproduced. The selector, which can be operated from either the left or right, is linked with a shaft that penetrates the mechanical box, realizing smooth rotation and a solid click feeling.
-
Equipped with FET
Equipped with FET (electronic switch) instead of the conventional mechanical switch. Compared to mechanical switches, the current loss generated at the contacts is reduced, and the response from pulling the trigger to firing a BB bullet is improved.
-
M-SYSTEM
Newly developed "M-SYSTEM" in which a microcomputer (MCU = microcontroller unit) comprehensively monitors and controls FETs, FC (Fire Control), batteries, and motors. It not only monitors information from 7 sensors and various voltages to switch the shooting mode and control the rotation of the motor, but also has safety such as detecting damage or abnormality in each place and stopping the operation. It is a system.
-
Pursuing appearance reproducibility
Many metal parts such as the upper receiver are coated with powder that has a texture close to the real thing. In addition, the hand guard, lower receiver, butt plate, selector, and cocking lever are molded with reinforced nylon resin that is close to the real material.
-
Increased rigidity in various places
By reviewing the parts composition of the cocking handle and adopting reinforced nylon resin, it is possible to hit the locked cocking lever back, commonly known as "HK slap".
-
Silencer standard equipment
The silencer machined from aluminum reproduces the grainy finish. Internal sound absorbing material reduces firing sound. Also, by removing the silencer, you can install a muzzle option with a 14mm reverse screw specification.
-
Realistic press-finished magazine
72 bullets. Comes with a magazine that uses a steel press outer case with the seams welded all around like the real thing. * Magazine compatibility is not compatible with other series of MP5 models such as the electric gun standard type.